Careers

We are hiring!

Mikrosens is looking to expand its team with talented, motivated, and hard-working individuals who have a desire to work in a challenging and rewarding environment. The location is our headquarters in Ankara, Turkey.  Send your resume and cover letter to us and indicate the Job ID that you wish to be considered for: 

Open requisitions:

MS.PE.002: Test Engineer (NEW)

MS.PE.012: Senior Test Engineer (NEW)

MS.IC.001: IC Design Engineer

MS.IC.011: Senior IC Design Enginer

MS.IC.002: System Design Engineer

MS.IC.012: Senior System Design Engineer

MS.PE.001: Process/Test Engineer

MS.PE.011: Senior Process/Test Engineer

MS.SM.011: Senior Applications Engineer

Job ID: MS.IC.001, IC Design Engineer

Experience Level: Entry/Junior

Overview: In this position, the candidate will participate in the design, development, testing and characterization of Mikrosens’ cost-effective infrared image sensors

Responsibilities:
1. Mixed-signal CMOS IC design, simulations, and verification; focusing especially on imaging systems
2. Transistor-level low noise sensor interface design, simulation, and verification
3. Mixed-signal CMOS layout drawing and verification
4. Specific IP development of mixed-signal blocks and systems
5. Full-chip simulation and verification (Fast spice, etc.)
6. Block and chip-level bring-up, validation, and debugging
7. FPGA firmware development
8. Chip architecture, registry, interface and design documentation

Requirements: 
1. Experience with analog and mixed-signal CMOS IC design
2. Experience with system level modeling and simulation
3. Experience with mixed-signal layout drawing techniques and tools
4. Experience with Matlab, C, or similar programming language for design verification or modeling
5. Knowledge of FPGA programming environment (Verilog/VHDL)
6. Hands-on experience with lab equipment
7. Attention to detail and ability to follow instructions are critical requirements
8. Video processing/DSP knowledge is a plus
9. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
10. Where applicable, exempt from/completed mandatory military duty
11. Minimum MS, or BS +2 years of experience in electronics engineering or a similar discipline
12. Travel may be required 

Top

Job ID: MS.IC.011, Senior IC Design Engineer

Experience Level: Mid-level

Overview: In this position, the candidate will participate in the design, development, testing and characterization of Mikrosens’ cost-effective infrared image sensors

Responsibilities:
1. Mixed-signal CMOS IC design, simulations, and verification; focusing especially on imaging systems
2. Transistor-level low noise sensor interface design, simulation, and verification
3. Mixed-signal CMOS layout drawing and verification
4. Specific IP development of mixed-signal blocks and systems
5. Full-chip simulation and verification (Fast spice, etc.)
6. Block and chip-level bring-up, validation, and debugging
7. FPGA firmware development
8. Chip architecture, registry, interface and design documentation

Requirements: 
1. Experience with analog and mixed-signal CMOS IC design
2. Experience with system level modeling and simulation
3. Experience with mixed-signal layout drawing techniques and tools
4. Experience with Matlab, C, or similar programming language for design verification or modeling
5. Knowledge of FPGA programming environment (Verilog/VHDL)
6. Hands-on experience with lab equipment
7. Attention to detail and ability to follow instructions are critical requirements
8. Video processing/DSP knowledge is a plus
9. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
10. Where applicable, exempt from/completed mandatory military duty
11. Minimum PhD, MS+3, or BS +5 years of experience in electronics engineering or a similar discipline
12. International travel may be required

Top

Job ID: MS.IC.002, System Design Engineer

Experience Level: Entry/Junior

Overview: In this position, the candidate will participate in the design, development, testing and characterization of Mikrosens’ infrared imaging systems

Responsibilities:
1. Design, implement and setup complete imaging and visualization systems using Mikrosens’ low-cost infrared sensors
2. Mixed-signal low-noise PCB design; focusing on infrared imaging systems
3. Board level design, simulation and verification
4. FPGA or DSP firmware development
5. Board architecture, registry, interface and design documentation

Requirements: 
1. Experience with analog and mixed-signal PCB design
2. Extensive hands-on experience with lab equipment
3. Experience with system level modeling and simulation
4. Experience with mixed-signal PCB layout drawing techniques and tools
5. Knowledge of FPGA programming environment (Verilog/VHDL)
6. Attention to detail and ability to follow instructions are critical requirements
7. Experience with Matlab, C, or similar programming language is a plus
8. Video processing/DSP knowledge is a plus
9. Optical theory knowledge is a plus
10. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
11. Where applicable, exempt from/completed mandatory military duty
12. Minimum MS, or BS +2 years of experience in electronics engineering or a similar discipline
13. International travel may be required

Top

Job ID: MS.IC.012, Senior System Design Engineer

Experience Level: Mid-level

Overview: In this position, the candidate will participate in the design, development, testing and characterization of Mikrosens’ infrared imaging systems

Responsibilities:
1. Design, implement and setup complete imaging and visualization systems using Mikrosens’ low-cost infrared sensors
2. Mixed-signal low-noise PCB design; focusing on infrared imaging systems
3. Board level design, simulation and verification
4. FPGA or DSP firmware development
5. Board architecture, registry, interface and design documentation

Requirements: 
1. Experience with analog and mixed-signal PCB design
2. Extensive hands-on experience with lab equipment
3. Experience with system level modeling and simulation
4. Experience with mixed-signal PCB layout drawing techniques and tools
5. Knowledge of FPGA programming environment (Verilog/VHDL)
6. Attention to detail and ability to follow instructions are critical requirements
7. Experience with Matlab, C, or similar programming language is a plus
8. Video processing/DSP knowledge is a plus
9. Optical theory knowledge is a plus
10. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
11. Where applicable, exempt from/completed mandatory military duty
12. Minimum PhD, MS+3, or BS +5 years of experience in electronics engineering or a similar discipline
13. International travel may be required

Top

Job ID: MS.PE.001, Process/Test Engineer

Experience Level: Entry/Junior

Overview: In this position, the candidate will participate in the development of production processes and in sensor prototype production in a clean room environment using state-of-the-art production equipment

Responsibilities:
1. Assisting the development of leading edge production processes for MEMS imaging sensors in a clean room environment
2. Sensor prototype production using state-of-the-art production equipment, in a clean room environment
3. Working with internal and external teams to characterize and improve MEMS image sensor performance
4. Control, management and optimization of the MEMS image sensor production process
5. Collaboration with other engineering groups to support high volume production

Requirements:  
1. Experience with semiconductor and MEMS production equipment
2. Good understanding of semiconductor device physics
3. Ability to appropriately handle mechanically- and electrically-sensitive visualization, measurement, and test equipment for CMOS and MEMS wafer production
4. Ability to appropriately handle chemicals for semiconductor and MEMS production
5. Familiarity with electrical test equipment
6. Good writing, presentation, and communication skills
7. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must.
8. Clean room experience including but not limited to lithography, metal etching, DRIE etching, and wafer bonder and dicer equipment is a plus
9. Attention to detail and ability to follow instructions are critical requirements
10. Optical theory knowledge is a plus
11. Where applicable, exempt from/completed mandatory military duty
12. International travel may be required
13. Minimum BS in electronics, mechanical, or chemical engineering, physics, chemistry, or a similar discipline

Top

Job ID: MS.PE.011, Senior Process/Test Engineer

Experience Level: Mid-level

Overview: In this position, the candidate will lead the development of production processes and in sensor prototype production in a clean room environment using state-of-the-art production equipment

Responsibilities:
1. Develop leading edge production processes for MEMS imaging sensors in a clean room environment
2. Sensor prototype production using state-of-the-art production equipment, in a clean room environment
3. Working with internal and external teams to characterize and improve MEMS image sensor performance
4. Control, management and optimization of the MEMS image sensor production process both internally and externally
5. Collaboration with other engineering groups to support high volume production

Requirements:  
1. Clean room experience including but not limited to lithography, metal etching, DRIE etching, and wafer bonder and dicer equipment
2. Experience with semiconductor and MEMS production equipment
3. Ability to appropriately handle mechanically- and electrically-sensitive visualization, measurement, and test equipment for CMOS and MEMS wafer production
4. Ability to appropriately handle chemicals for semiconductor and MEMS production
5. Familiarity with electrical test equipment
6. Good understanding of semiconductor device physics
7. Good writing, presentation, and communication skills
8. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
9. Attention to detail and ability to follow instructions are critical requirements
10. Optical theory knowledge is a plus
11. Where applicable, exempt from/completed mandatory military duty
12. International travel may be required
13. Minimum MS +2, or BS +4 years of experience in electronics, mechanical, or chemical engineering, physics, chemistry, or a similar discipline

Top

Job ID: MS.SM.011, Senior Applications Engineer

Experience Level: Mid-level

Overview: The candidate will join the Mikrosens sales organization and successfully engage with and support local and international customers in the design and development of low-cost imaging and other visualization systems

Responsibilities:
1. Work with the engineering team to understand the product portfolio and generate detailed technical documentation.
2. Design, implement and setup complete, user-friendly technical demonstrations of low-cost infrared sensors and imaging systems
3. Manage customer programs effectively to turn design wins into long-term revenue.
4. Closely work with experienced internal and external engineering teams to ensure timely market introduction of products using Mikrosens low-cost infrared imaging sensors.

Requirements:
1. Strong system-level understanding of electronic modules, cameras and other electronic systems
2. Customer facing, in-depth technical experience with a multinational semiconductor company
3. Strong presentation, technical and non-technical writing, editorial and inter-personal skills is a must
4. Experience with Matlab.
5. Hands-on experience with PCB design
6. Hands-on experience with Perl or another scripting language
7. Ability to reverse-engineer complete imaging systems
8. Optical theory and infrared knowledge is a big plus
9. Experience with C, C++, MS Visual Studio is a plus
10. Experience with mobile development platforms/tools (Eclipse IDE, iOS, Android) is a plus
11. Familiarity with digital video and image processing is big plus
12. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
13. Domestic and international travel may be required
14. Minimum PhD+3, MS +5, or BS +8 years of experience with a degree in electronics engineering or a similar discipline
15. Where applicable, exempt from/completed mandatory military duty

Job ID: MS.PE.002, Test Engineer (NEW)

Experience Level: Entry-level

Overview:

The ideal candidate will join the Mikrosens product engineering organization and successfully participate in the development of production processes and in sensor volume production using state-of-the-art production equipment.

Responsibilities include:

1. Assisting the characterization and test processes of the MikroSens imaging sensors and systems
2. Assisting sensor prototype production using state-of-the-art production equipment
3. Assisting development of sophisticated test systems in the laboratory and clean room environment
4. Working with internal and external teams to improve testing and characterization environments
5. Control, management and optimization of the image sensor and imaging system production processes
6. Collaboration with other engineering groups to support high volume production

Requirements:                 

1. Experience with PCB development
2. Experience with IC and PCB test equipment
3. Experience with communication protocols ( serial communication, GPIB, etc)
4. Experience with software development environment (.NET, Eclipse, etc) is a plus
5. Experience with FPGA development is a plus
6. Ability to appropriately handle mechanically- and electrically-sensitive visualization, measurement, and test equipment for wafer production is a plus
7. Optical theory knowledge is a plus
8. Good writing, presentation, and communication skills
9. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
10. Attention to detail and ability to follow instructions are critical requirements
11. Where applicable, exempt from/completed mandatory military duty
12. International travel may be required
13. Minimum BS in electronics or computer engineering, or a similar discipline

Job ID: MS.PE.012, Senior Test Engineer (NEW)

Experience Level: Mid-level

Overview:

The ideal candidate will join the Mikrosens product engineering organization and successfully participate in the development of production processes and in sensor prototype production using state-of-the-art production equipment.

Responsibilities include:

1. Generation of characterization and test processes of the MikroSens imaging sensors and systems
2. Sensor prototype production using state-of-the-art production equipment
3. Development of sophisticated test systems in the laboratory and clean room environment
4. Working with internal and external teams to improve testing and characterization environments
5. Control, management and optimization of the image sensor and imaging system production processes
6. Collaboration with other engineering groups to support high volume production

Requirements:                 

1. Experience with PCB development
2. Experience with IC and PCB test equipment
3. Experience with communication protocols ( serial communication, GPIB, etc)
4. Experience with software development environment (.NET, Eclipse, etc) is a plus
5. Experience with FPGA development is a plus
6. Ability to appropriately handle mechanically- and electrically-sensitive visualization, measurement, and test equipment for wafer production is a plus
7. Optical theory knowledge is a plus
8. Good writing, presentation, and communication skills
9. Willingness to work in a stressful, challenging and rewarding startup environment, where flexibility and ability to rapidly adapt to changing environments is a must
10. Attention to detail and ability to follow instructions are critical requirements
11. Where applicable, exempt from/completed mandatory military duty
12. International travel may be required
13. Minimum MS +2, or BS +4 years of experience in electronics or computer engineering, or a similar discipline

Top